1 / 3
IKEA Skadis Regal / Skadis Shelf (no supports)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a shelf for bluetooth speakers or similar (no supports)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 366
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
Deutsch:
Ich habe ein Regal entworfen, das für Bluetooth Lautsprecher gedacht ist, aber natürlich für alles mögliche verwendet werden kann.
Maße:
- Höhe: 19mm
- Breite: 181mm
- Tiefe: 56mm (Nutzfläche ohne Skadis Haken)
Druckanweisungen:
- auf dem Kopf liegend drucken (Oberseite des Regals flach auf Druckplatte)
- Ich empfehle 0.2mm Schichthöhe und 10% Gyroid Infill
Montage:
- einfach ins Skadis einhängen (verwendet 4 der Löcher)
English:
I designed a small shelf that is meant to be used for bluetooth speakers, but of course can also be used for basically everything.
Dimensions:
- height: 19mm
- width: 181mm
- depth: 56mm (usable space without skadis hooks)
printing instructions:
- print laying on top (the part where you place your stuff on should face the buildplate)
- i used 0.2mm layer height and 10% gyroid infill
assembly:
- simply hook it up to your skadis (uses 4 holes)