1 / 6
Bag Pack Fan Regulator Housing for MK4 xBuddybox-cover — zdjęcie 1
1 / 6

Bag Pack Fan Regulator Housing for MK4 xBuddybox-cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bag Pack Fan Regulator Housing for MK4 xBuddybox-cover

Ocena
0 / 5
Polubienia
3
Pobrania
10
Wydruki
0
Wyświetlenia
158
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I used the follwing coolingsystem from František Celler XBody Cover for my Prusa MK4s, because the Buddy Board was for my understanding to hot. I had up to 70 degrees at the Buddy Board. After i installed the coolingsystem the temperature is going down to round about 30 degrees.
After a couple of time the fan was a little bit annoying me.
I decided to create a posibility to regulate the fan.

I bought the following Motor Speed Regulator https://www.amazon.de/dp/B0CL69TW55?ref=ppx_yo2ov_dt_b_fed_asin_title und designed a back pack housing for the cover.

I have no external Power Supply for my fan, because i'm using the Power Supply from the printer and a 24V Fan https://www.amazon.de/dp/B07G12PNJD?ref=ppx_yo2ov_dt_b_fed_asin_title.

Now the fan isn't noisy and the temperature is round about 35-40 degrees.

 

You can print it without support!

Tagi