Bag Pack Fan Regulator Housing for MK4 xBuddybox-cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bag Pack Fan Regulator Housing for MK4 xBuddybox-cover
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 158
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I used the follwing coolingsystem from František Celler XBody Cover for my Prusa MK4s, because the Buddy Board was for my understanding to hot. I had up to 70 degrees at the Buddy Board. After i installed the coolingsystem the temperature is going down to round about 30 degrees.
After a couple of time the fan was a little bit annoying me.
I decided to create a posibility to regulate the fan.
I bought the following Motor Speed Regulator https://www.amazon.de/dp/B0CL69TW55?ref=ppx_yo2ov_dt_b_fed_asin_title und designed a back pack housing for the cover.
I have no external Power Supply for my fan, because i'm using the Power Supply from the printer and a 24V Fan https://www.amazon.de/dp/B07G12PNJD?ref=ppx_yo2ov_dt_b_fed_asin_title.
Now the fan isn't noisy and the temperature is round about 35-40 degrees.
You can print it without support!