1 / 2
Heavy duty wall shelf NAS SYNOLOGY DS223J
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heavy duty wall shelf NAS SYNOLOGY DS223J with ventilation
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 263
- Wydruki
- 3
- Wyświetlenia
- 1257
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 3) (Komentarze: 5)Remiksy (0)Kolekcje (35)Powiązane
My main goal is reliability. It's a very robust design but on the other hand it takes a long time to print
There are two holes for 6mm screws. The shelf is ventilated from below so as not to disrupt air flow.
Please see the plan with dimensions for best information.
Instructions :
Robustness essentially depends on the number of walls.
- I use PLA and all plastics are ok
- 5 walls
- 4 lower layers
- 4 upper layers
- filling 35%
- No support
- Of course, please orient the piece correctly in your slicer (on the sides !)
I got a heavy part that seemed very solid as I hoped. Aprox. 420gr of material and printing during 16-17h !
I also leave you the source file for any possible modifications.
