1 / 4
Various Horror Film Themed Faces for thjelmfelt's Jack O'Lantern with Snap On Faces (2017 Version) — zdjęcie 1
1 / 4

Various Horror Film Themed Faces for thjelmfelt's Jack O'Lantern with Snap On Faces (2017 Version)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Interchangeable faces for thjelmfelt's Jack O'Lantern.

Ocena
0 / 5
Polubienia
27
Pobrania
45
Wydruki
0
Wyświetlenia
329
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial
  • I've included the original assembly files (and remixed “realistic stem” by Jyoungun76) in a separate .zip file. 
  • All designs (except Jason and Evil Dead) are two sided, but you can choose to only print one side and print a blank for the reverse side. 
  • Be sure to print a total of 8 clips (4 clips per side.) 
  • I recommend using an infill like “lightning” on the faces for a more organic look. I forgot on a couple, and you can see on my Scream pumpkin that gyroid looks a bit too dense and darkens it, and triangle infill looks… well, triangle-y on Jason. That said, the infill showing through is greatly exaggerated by the photo and you probably won't notice in person. 
  • Pop in an LED tea candle for a really fun, surprisingly convincing glow.

From original creator thjelmfelt:

Why have one face for your Jack O'Lantern when you could swap them out?

This Jack O'Lantern has interchangeable front and back faces so you can change what you want it to look like without printing a whole new thing! If you have a good light inside you should be able to have one side facing forward while the other projects out the back. Finally, the faces are printed flat so the designs are less limited by gravity.

Tagi