*NEW* Filament Storeage Solution - 100% 3D Printed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Store ALL your filament in one place with this simple, scalable solution! It's a spool of genius!
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 323
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you enjoy the model, please leave a Like or a Make. It's free for you and helps me out a bunch!
Summary
This modular connector part holds filament spools together for organization on a desk or shelf. I found the other storage methods taking a long time or requiring you to buy extra items, so I made this solution 100% 3D-printed and fairly fast. Let's get into the good stuff:
Important:
- Flip the model so the wide part is at the bottom when slicing. This uses less support and significantly reduces print time.
- Works on all spools with an inner diameter of 53mm or more.
Print Settings
- Supports:
Yes- Touching Build Plate Only
- Resolution:
.2 mm
- Infill:
10%
- Print Speed:
200% (≈90m/s)
-Feel free to edit the .stl and .f3d files; Just give attribution where attribution is due
-Also, if you have any feedback on the model, leave a comment, and I will (probably) make an update.