Kanto Pokedex Case for Moto G100 Phone
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A TPU case designed after (I think) the best Pokedex Design
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 591
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
I couldn't find a Pokedex case for my phone (the Motorola g100) online anywhere, so I made one from scratch.
I made mine with 95A TPU and I feel like there's just enough give to be a pretty protective case. It's got cutouts for both front and rear cameras, cutouts for the fingerprint reader and volume keys, as well as a bottom cutout for the USB-C jack, headphone jack, and bottom speaker.
I did not include a cutout for the "google assistant button" because who uses that? I just left an indentation inside the case so the button won't be pressed accidentally.
Also, I do know the Kanto Pokedex opens the other way, but some concessions had to be made due to the phone's button layout.
---------------------------------------------------------------
Printing Etc:
Obviously, this is sized for the Motorola Moto G100.
Everything should already be oriented for printing.
(The pins should be the only thing printed in PLA or whatever non-flex material you have)
I found 0.14mm layer height and 100% infill to work excellent for a TPU print.
Assembly is pretty obvious. Just use the small pin to connect the Hinge to the Lid, then the larger pin to connect the Body to the Hinge.
Slide the phone in, and press-fit the plug to secure your phone. I haven't had any issues with the plug being too loose or the phone slipping out.