EVA 3 toolhead made for V-minion 1.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is made for Cartesian style the V-minion 1.1 use. and redesigned for 9mm belts. + some other small stuff :-)
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 891
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
i used the LGX-Rapido combo but you can of course use other stuff as well :-)
if you wanna go sensor less (I recommend)
use this mod
https://www.printables.com/model/382785-eva3-stop-block-for-sensorless-homing
if you wanna use a 40mm fan inlet with heat inserts
use this mod
https://www.printables.com/model/335085-eva-cooling-inlet-40mm-heat-insert-mod
changes i have done :-)
the 2 above of course
cable guide mount: It is moved back to clear the LGX
cable guide : i have offset some faces so it align with the mount faces
you can use the original if you want to
Back Cartesian 9mm: this now takes 9mm belt and i have cleaned it up a little
Belt grabber 9mm: this now takes 9mm belt and made it with heat inserts
Tank shroud: i have just realigned the slots so they fit the 8mm probe screw
you can use any of the original designs here
Top endstop: redone the end to fit heat inserts
Front: removed belt grabbers added a 3rd contact for probe mount
cleaned the back so it have more air flow
tightened the holes for the adxl
probe mount: added a 3rd screw and made it easier to print
LGX mount: added some chamfers and redid the opening so you can mount it
directly out of the package.
