EVA 3 toolhead made for V-minion 1.1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is made for Cartesian style the V-minion 1.1 use. and redesigned for 9mm belts. + some other small stuff :-)
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 113
- Makes
- 0
- Views
- 897
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
i used the LGX-Rapido combo but you can of course use other stuff as well :-)
if you wanna go sensor less (I recommend)
use this mod
https://www.printables.com/model/382785-eva3-stop-block-for-sensorless-homing
if you wanna use a 40mm fan inlet with heat inserts
use this mod
https://www.printables.com/model/335085-eva-cooling-inlet-40mm-heat-insert-mod
changes i have done :-)
the 2 above of course
cable guide mount: It is moved back to clear the LGX
cable guide : i have offset some faces so it align with the mount faces
you can use the original if you want to
Back Cartesian 9mm: this now takes 9mm belt and i have cleaned it up a little
Belt grabber 9mm: this now takes 9mm belt and made it with heat inserts
Tank shroud: i have just realigned the slots so they fit the 8mm probe screw
you can use any of the original designs here
Top endstop: redone the end to fit heat inserts
Front: removed belt grabbers added a 3rd contact for probe mount
cleaned the back so it have more air flow
tightened the holes for the adxl
probe mount: added a 3rd screw and made it easier to print
LGX mount: added some chamfers and redid the opening so you can mount it
directly out of the package.
