Remix of Nozzle Scrubber with Little bucket for Harbor Freight Magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had a bunch of harbor freight magnets sitting around and wanted to use them rather than ordering more, so I remixed...
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 171
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had a bunch of harbor freight magnets sitting around and wanted to use them rather than ordering the smaller ones in the original post, so I remixed it be able to use the larger magnets.
these are designed with 8mm wide holes to accommodate the 5/16 inch magnets. I also made the pockets slightly deeper to make sure the magnets sit flush.
Here are the magnets I'm using.
https://www.harborfreight.com/hardware/magnets/10-piece-rare-earth-magnets-67488.html
It was made for the 2.4 voron, but I am using this arm to attach it to my trident.
https://www.printables.com/model/298565-nozzle-scrubber-arm-extension-voron-trident
They may need to be reoriented in our slicer.
(Updated to make the magnet holes .5mm wider so the magnets fit better. And moved them back 2mm so they weren't up against the outside perimeter of the model)