MyBook HDD Slim Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slim case for MyBook HDD with optional Raspberry Pi attachment.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Description:
This case is designed to reduce HDD temperatures without active cooling, while also accommodating a Raspberry Pi mount.
Required Materials:
You'll need the following parts:
- 4 side screws (from the original black MyBook casing)
- 1 PCB cover screw (from the original black MyBook casing)
- Additional 3 screws for attaching the backplate
Raspberry Pi Mounting:
To add a Raspberry Pi, use 2 zipties through carefully placed holes on the bottom of the case. Alternatively, a rubber band can also work (though it may not be as reliable in the long term). Malolo's Raspberry Pi 4 and Malolo's Raspberry Pi 3 cases are compatible.
Printing Recommendations:
When printing this model, PLA works well for the “mybook-cover” and “mybook-base” parts due to their relatively low temperature exposure. For the rest of the case, PETG or ABS is recommended for higher thermal tolerance.
To achieve a strong bond between layers, print the "mybook-base" part on its side.