MyBook HDD Slim Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slim case for MyBook HDD with optional Raspberry Pi attachment.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 22
- Makes
- 0
- Views
- 127
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
Description:
This case is designed to reduce HDD temperatures without active cooling, while also accommodating a Raspberry Pi mount.
Required Materials:
You'll need the following parts:
- 4 side screws (from the original black MyBook casing)
- 1 PCB cover screw (from the original black MyBook casing)
- Additional 3 screws for attaching the backplate
Raspberry Pi Mounting:
To add a Raspberry Pi, use 2 zipties through carefully placed holes on the bottom of the case. Alternatively, a rubber band can also work (though it may not be as reliable in the long term). Malolo's Raspberry Pi 4 and Malolo's Raspberry Pi 3 cases are compatible.
Printing Recommendations:
When printing this model, PLA works well for the “mybook-cover” and “mybook-base” parts due to their relatively low temperature exposure. For the rest of the case, PETG or ABS is recommended for higher thermal tolerance.
To achieve a strong bond between layers, print the "mybook-base" part on its side.