1 / 4
3-way switch case for a bicycle — zdjęcie 1
1 / 4

3-way switch case for a bicycle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I made this to switch between a street headlight and a trail headlight on my bicycle.

Ocena
5 / 5
Polubienia
6
Pobrania
27
Wydruki
1
Wyświetlenia
425
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I made this to switch between a street headlight and a trail headlight on my bicycle. The case takes a 3-way switch like this one: https://www.amazon.de/gp/product/B09BM4CFCY

I used an MMU2S, but if you don't have one, I believe you can get the printer to prompt for a filament change on the lettering bodies. at 0.3 mm there are only three switches. 

The holes on the press fit lid:
LO: Low beam
HI: High beam
R: Rear light
PS: Power source (for me a dynamo)

There are two different case shells, depending on whether you want to mount the switch in front or behind your handle bars.

Tagi