nozzle brush for Prusa XL 3mm brushes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this simple upgrade that makes multimaterial printing far neater and reduces maintance essentially it wipes its self
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
printing instructions
filiment PETG (or other high temp filiment)
infill no great matter what
0.4 nozzle probably best
concept
the idea behined this is to solve the nozzle jaming problem i have found common with the prusa xl this is due to one of two problems in most cases poor bed adheasion or filiment build up on the nozzle this solves that by doing what it says on the tin wipping the nozzle it takes a 3mm wire brush as linked bellow it also uses one threaded m3 insert the hole for which is 4.4mm wide it prints in about 20minutes per part
while this bares some resemblance to https://www.printables.com/model/462473-prusa-xl-series-nozzle-scrubber-brush-update-inclu it is not based on it atleast directly i did attempt to make it cross compatible once i discovered it but moddled the whole thing in fusion from scratch.