MagSafe iPhone Charging Stand - Floating Puck
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modern charging stand for your MagSafe devices with cutouts for VHB tape or 12.9x3.5mm rubber bumpers.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a modern, sleek charging stand for your MagSafe devices that looks great even when it's just sitting on your desk. No more tech eyesores!
Note: While iPhones support MagSafe out of the box, this stand is also compatible with any phone that has a MagSafe-compatible case!
Assembly
- Slot the charging portion onto the base
- NOTE: The tolerance between the pillar and the slot is 0.15mm, this prints and goes together well with my Bambu X1C.
- If you are having trouble getting the 2 pieces to slot together, please try the “0.2mm” or “0.25mm” models which have a looser tolerance.
Printing
- Layer height: 0.2mm - 0.3mm
- Infill: 10%
- Walls: 3
- Support: Organic
- Tip: I'd add a “Modifier” to the “base” of the base model and set infill to 100%
- This adds some additional weight to the base
Features
- Cutouts for 12.9x3.5mm rubber bumpers
- VHB tape cutouts on the base
- Note: I highly recommend you use the VHB tape cutouts on the bottom of the base!
Don't know which MagSafe charger you have? Check out our blog post about it: https://www.bakedbean3d.com/tutorials-and-guides/how-to-tell-which-magsafe-charger-you-have
Happy printing!
Want to sell this print? Become a member today!