Reolink PoE Doorbell In-Wall Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reolink PoE Doorbell In-Wall Box
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 515
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Origin
I wanted a box for the Ethernet cable for the Reolink Doorbell for a new house build where the drywall is not up yet.
I designed this to hopefully channel any water back out of the box and wall due to the angled bottom. You'll want foam or some sealant around the hole still.
Customizable Mounting Options
I wasn't sure which mounting orientation would work with my install so I placed mounting screw ears that can be removed with some flush cutters, or by hand, if they are in the way or not needed.
Example
In my photos, you can see that I snapped some off on the right side and I bent back the leftside ears on the back of the box to be able to use the screw holes on the right side.
Print Orientation / Support / Slicer Cut Tool
This model can be printed in a few different orientations.
This orientation allows the roof to print without supports but requires some support for the screw holes.
If you orient the print down you need less support. In some image I used OrcaSlicer's cut tool to remove the parts I didn't need for this print.
