1 / 3
Samsung S21 Ultra Phone Stand + Connecter for Watch Dock V2 — zdjęcie 1
1 / 3

Samsung S21 Ultra Phone Stand + Connecter for Watch Dock V2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This was made to connect directly into the Universal Smartwatch Dock by guppykIt is customised to fit my Phone

Ocena
0 / 5
Polubienia
0
Pobrania
12
Wydruki
0
Wyświetlenia
141
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This was made to connect directly into the Universal Smartwatch Dock by guppyk It is customised to fit my Samsung Galaxy S21 Ultra with a phone case although it would most likely fit one without a case and possibly any other phones with same dimensions as the S21 Ultra 

Edit: I have just made a better version after printing the 1st verison and the phone slid off, so now it has a lip to hold the phone in place and the charger hole is longer to fit properly and the back is completely straight as i drew it from scratch based off original measurements.

The Stand is 80mm x 11mm at the base and 108.5mm tall The hole for the charger measures at 14.5mm x 8mm x 25mm

I would appreciate any likes, downloads or tips :) Thank you

Print Settings

Printer Brand:

Creality

Printer: 

Ender-3 V2 Neo

Rafts: Doesn't Matter

Supports: 

Yes

Infill: 20%

Filament: Any  
 

Notes: 

I printed with Tree Supports and make sure to lay it on the flat side of the stand not on the connector side.

How I Designed This

Remix

This model was adapted from the original Universal Watch Dock for a Samsung s21 Ultra stand

 

 

Category: Household

Tagi