1 / 7
Xiaomi Selfie Tripod Stick Phone Holder Piece — zdjęcie 1
1 / 7

Xiaomi Selfie Tripod Stick Phone Holder Piece

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This can be used to salvage the xioami selfie tripod stick. The fingers on the phone holder break easily.

Ocena
0 / 5
Polubienia
4
Pobrania
12
Wydruki
0
Wyświetlenia
314
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Public Domain

the xiaomi stick is great, but it suffers from a design flaw. The fingers on the phone holder break easily. 

I spent a bunch of time and prototypes refining something that would make it usable again if the fingers break. If one finger breaks you would need to break the other one off as well. you want a flat surface. I sanded down the area where the fingers attached. 

Note, the part is two pieces. I used CA glue to attach them to the device and it worked great. It's way stronger that the original. and overall it's really not too bad. 

The model isn't perfect and it's brute force but it is a decent part. 

Please note the orientation to print the part. Because of the expected direction of force when the part is installed this orientation is the best. It results in a slight overhang, but my old printer managed it quite well with really old filament. 

I didn't spend any time cleaning up the part once gluing it. Also the part in the files is actually a refined version of the part in the picture. I did clean up the file a little bit but I had already glued this version to my stick. 

i have also included the gcode if that's useful. 

This is a link to the model:

https://cad.onshape.com/documents/735209ffbeabdecac7d0f2eb/w/22b8095f2d9d92640d912da4/e/7889190d11815b935552a720?renderMode=0&uiState=672083acdcb6a2249d0afaf7

Tagi