1 / 10
3.5mm Jack Mod for Peltor Sporttac
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3.5mm Jack Mod for Peltor Sporttac.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 393
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This mod replaces the proprietary connector of the Peltor SportTac with a standard 3.5mm socket, allowing for easier connection to audio sources.
I ordered this socket from AliExpress. If you wish to use a different socket, I have included a version without a hole (STL and STEP files).
- Test fit the adapter and remove material as needed (mainly clean up where the supports were).
- Glue the socket into the adapter, orienting it as shown in the pictures.
- Bend the long pin (ground) 90° towards the middle to match the length of the other two pins.
- Cut the original cables as long as possible.
- Solder the wires: black to the long pin (ground) and green to one of the other two pins (depending on whether you want to hear left or right audio).
- Push the adapter into place.
- Test it out. Note: It will only work when the headphones are powered on!