1 / 10
3.5mm Jack Mod for Peltor Sporttac
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3.5mm Jack Mod for Peltor Sporttac.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 22
- Makes
- 0
- Views
- 393
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This mod replaces the proprietary connector of the Peltor SportTac with a standard 3.5mm socket, allowing for easier connection to audio sources.
I ordered this socket from AliExpress. If you wish to use a different socket, I have included a version without a hole (STL and STEP files).
- Test fit the adapter and remove material as needed (mainly clean up where the supports were).
- Glue the socket into the adapter, orienting it as shown in the pictures.
- Bend the long pin (ground) 90° towards the middle to match the length of the other two pins.
- Cut the original cables as long as possible.
- Solder the wires: black to the long pin (ground) and green to one of the other two pins (depending on whether you want to hear left or right audio).
- Push the adapter into place.
- Test it out. Note: It will only work when the headphones are powered on!