1 / 6
Air Quality Monitor Wall Mount / Backplate — zdjęcie 1
1 / 6

Air Quality Monitor Wall Mount / Backplate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A mount to secure this Air Quality Monitor to the wall. Two options available, one with and one without screw holes.

Ocena
0 / 5
Polubienia
4
Pobrania
13
Wydruki
0
Wyświetlenia
207
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A Mounting Bracket to attach your Air Quality Monitor (AQM) to the wall. I created two versions, one with screw holes around the perimeter and one without (to stick it to the wall).

Designed to be used with this Air Quality Monitor - https://geni.us/AirQuality 

(Amazon Affiliate Link, this means I can earn a small commission from a sale, but don't worry it doesn't cost you any more).

Assembly

Push out support material using 2mm drill bit

Remove the four screws on the back of the AQM

Place the AQM on the mount

Use the same four screws to attach the mount to the AQM from the rear.

Secure to the wall.

Print Notes

This model is an easy print. I would recommend PLA.

  • Nozzle: 0.4mm

  • Layer Height: 0.20mm

  • Infill: 15%

  • Orientation: Back of mount onto print bed

  • Supports: Yes, auto

  • Brim: None

  • Top Shell Layers: 4

  • Bottom Shell Layers: 3

  • Wall Loops: 2

  • Top Surface Pattern: Montonic

  • Bottom Surface Pattern: Archimedean Chords

23 grams per build and takes 39 minutes.

I hope you find this model useful. If so we would love it, if you can give us a LIKE.
You can also follow us on our YouTube Channel here.

Tagi