Air Quality Monitor Wall Mount / Backplate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount to secure this Air Quality Monitor to the wall. Two options available, one with and one without screw holes.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 13
- Makes
- 0
- Views
- 207
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A Mounting Bracket to attach your Air Quality Monitor (AQM) to the wall. I created two versions, one with screw holes around the perimeter and one without (to stick it to the wall).
Designed to be used with this Air Quality Monitor - https://geni.us/AirQuality
(Amazon Affiliate Link, this means I can earn a small commission from a sale, but don't worry it doesn't cost you any more).
Assembly

Push out support material using 2mm drill bit

Remove the four screws on the back of the AQM

Place the AQM on the mount

Use the same four screws to attach the mount to the AQM from the rear.
Secure to the wall.
Print Notes
This model is an easy print. I would recommend PLA.
Nozzle: 0.4mm
Layer Height: 0.20mm
Infill: 15%
Orientation: Back of mount onto print bed
Supports: Yes, auto
Brim: None
Top Shell Layers: 4
Bottom Shell Layers: 3
Wall Loops: 2
Top Surface Pattern: Montonic
Bottom Surface Pattern: Archimedean Chords
23 grams per build and takes 39 minutes.
I hope you find this model useful. If so we would love it, if you can give us a LIKE. |