Futaba T4PM Plus hard case inserts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Conversion for Harbor Freight Apache 2800 hard case to re-purpose it into a Futaba T4PM Plus RC transmitter hard case.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 439
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a hard carry case for my Futaba T4PM Plus radio transmitter but could not find one I liked. So I found a hard case at Harbor Freight called the Apache 2800 and designed some ASA and TPU inserts to convert it into the carry case I needed. I had to spilt this into 2 pieces as it would not fit on the Bambu Labs X1C print plate as a whole. There are pegs build-in to align the 2 halves. I glued the 2 halves together using CA glue. I then glued the entire assembly into the Apache case using Gorilla Glue. I glued the logo plate onto the top of the case using CA glue too. I also had to cut about 2/3rd of the valve screw off to be able to put it back into the case without interfering with the ASA insert, I use a Dremel for this. I printed the ASA on my X1C and the TPU on my Prusa MK3S+.