Easy-Remove MK4 Nozzle Replacement Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the official nozzle replacement tool is easier to remove from the hotend.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 95
- Wydruki
- 1
- Wyświetlenia
- 579
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v3.0
Prusa's MK4 nozzle replacement tool is great, but it's hard to pull it off the hotend after the swap is complete. I redesigned it so you can depress the tab with your thumbnail (or a screwdriver) to release it.
I modeled this in Fusion 360. I've included .f3d and .STEP CAD files so you can further remix it.
Printing Instructions
- 0.2mm layer height
- Filament: PETG or PC-Carbon Fiber (I only tested PETG)
- After printing, cut the support material with a hobby knife in four places as shown in the photos.
Use
See the parent model's instructions. When you want to remove the tool, press the tab in the front down with your thumbnail or a screwdriver tip as shown in the photo.
The recommended torque for the nozzle is 1.5Nm, as documented here. I like to use the WERA Kraftform 7461 torque driver with a 7mm socket bit.