Holder for LED Stripe Profile (Indirect Lighting)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametricly customizable holder for LED Stripe profile originally designed for 17.6mm profile and 100° angle
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 77
- Wydruki
- 1
- Wyświetlenia
- 628
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Parametricly customizable holder for LED Stripe profile originally designed for 17.6mm profile and 100° angle but is fully Parametric inside Fusion 360 and can be customized to whatever profile and angle you want. Intended for indirect Lighting. Should be Printed on the Side without support and can be printed even 0.8mm Nozzle and 0.55mm Layer height without any problems on the Picture you can see the double version but this is exactly the same but with one Stripe instead of two(and yes i know they are installed crooked)