1 / 3
Add Horizontal Shelf to IKEA BRÄNNBOLL - Full Manual — zdjęcie 1
1 / 3

Add Horizontal Shelf to IKEA BRÄNNBOLL - Full Manual

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

How to add extra shelf to IKEA BRÄNNBOLL

Ocena
0 / 5
Polubienia
12
Pobrania
52
Wydruki
1
Wyświetlenia
1060
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Living Room
Licencja
Standard Digital File License

Option 1: Horizontal

Required Materials:

  • Glass sheet: 460mm x 200mm x 3mm (18.11" x 7.87" x 0.12"), with cut corners
  • Printable 4 adapters
  • Printable marker-sheet (template for screwing points)
  • Wood screws: 3.5x12 mm (or #6 x 1/2” for USA)
  • 8x2 mm silicone stoppers (IKEA part no. 107091 or equivalent from a furniture store)
  • Sharpie or other fine-tip marker
  • Screwdriver PZ2

Steps:

Prepare the Glass:

  • Purchase a custom cut glass sheet with dimensions 460mm x 200mm x 3mm (18.11" x 7.87" x 0.12"). Be sure the edges and corners are cut for safety and aesthetics.
  • Note: Avoid using acrylic or plexiglass, as these materials may bend or look uneven over time.

Position the Screwing Points:

  • Chose marker-sheet:
    • One Third of height - 70mm
    • Half of height - 105mm
  • Place the marker-sheet on the surface where the glass will be installed.
  • Use a Sharpie to mark the 4 points for screwing the adapters, aligning the marker-sheet carefully to ensure even positioning.

Install the Adapters:

  • Align each adapter with a marked point.
  • Secure each adapter by screwing it into place using the 3.5x12 mm wood screws (or #6 x 1/2” wood screws if you are in the USA).
  • Tighten each screw to ensure a stable foundation, but avoid over-tightening to prevent cracking or damaging the mounting surface.

Attach Silicone Stoppers:

  • Place an 8x2 mm silicone stopper on top of each adapter. This will help cushion the glass and hold it in place securely.
  • Ensure all stoppers are well positioned on the adapters for even support.

Mount the Glass:

  • Carefully place the glass sheet onto the adapters, making sure it rests evenly on the silicone stoppers.
  • Gently press down to ensure the glass is secure, with the stoppers preventing direct contact with the adapters for added protection.

Option 2: Vertical

TBD

It's under development - will be released soon

⚠ Licensing Details ⚠

What's allowed:
- selling prints among your friends and family
- remixing (but it does not change rules) 

What's forbidden:
- commercial usage
- listing on eBay / Etsy and other commercial aimed platforms 
- using any photos from my Printables and Instagram
- removing my logo from parts
- distributing original project files 
- being a dick and disobeying rules

What's welcome:
- clicking donate 🔗 button to help me
- sending remixes to merge it with project 
- sending me opinions and suggestions to help develop project 
- posting as many pictures of stands on Printables as you want
- following me on Instagram 🔗 or Facebook 🔗


__________________________________________________________________________________

🌟Disclaimer

IKEA does not support or authorize this project. IKEA and IKEA BRÄNNBOLL are trading marks of IKEA. 

Tagi