Prusa Mini PVC Tube adapter for Cardboard Spools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Makes sure that any spool can properly spin without a lot of force from the extruder.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 1
- Wyświetlenia
- 113
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Simple solution to a simple problem. Sometimes the layered nature of 3D prints doesn't cut it, so I just built an adapter to solve underextrusion problems with cardboard spools for the orignial Prusa Mini spool holder which can be found here: https://www.printables.com/model/672247-prusa-mini-filament-holder.
The current model uses a PVC tube with an inner diameter of ~20.60mm. The outer diameter is 23.50mm with a wall thickness of 1.5mm. This should be a standard size available in Europe.
Thanks to HutyJarl for the original model which served me very well until now!
Print instructions:
- Check out the original holder and print the lower base which attaches to the stepper motor on top(without any tool or hardware!).
- Enable supports.
- Print the model so that the tube insert points upwards. This ensures the perfect round shape so that it fits well into the PVC tube.