Prusa Mini PVC Tube adapter for Cardboard Spools
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Makes sure that any spool can properly spin without a lot of force from the extruder.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 1
- Views
- 114
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Simple solution to a simple problem. Sometimes the layered nature of 3D prints doesn't cut it, so I just built an adapter to solve underextrusion problems with cardboard spools for the orignial Prusa Mini spool holder which can be found here: https://www.printables.com/model/672247-prusa-mini-filament-holder.
The current model uses a PVC tube with an inner diameter of ~20.60mm. The outer diameter is 23.50mm with a wall thickness of 1.5mm. This should be a standard size available in Europe.
Thanks to HutyJarl for the original model which served me very well until now!
Print instructions:
- Check out the original holder and print the lower base which attaches to the stepper motor on top(without any tool or hardware!).
- Enable supports.
- Print the model so that the tube insert points upwards. This ensures the perfect round shape so that it fits well into the PVC tube.