Giiker Super Slide Pro Case w/ Extra Piece Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for Giiker Super Slide Pro Remixed from @Ridflea Note: I did this in Tinkercad.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 571
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial
Scaled up and slightly modified to fit the Giiker pro (screen and buttons, bigger piece storage area).
Please note I did this in Tinkercad (I'm no modeling pro!), and it's not perfect as there's slight gaps at the protruding parts and top/bottom of the print but it's minor. Works well otherwise!
All I pretty much changed was; scaled it up, removed the protrusion at the bottom for the pro, moved & tweaked the impressions for the buttons and screen, and expanded the pieces storage area. Someone else is more than welcome to tweak it and dial in the gaps but it friction fits well enough to probably not matter that much.
As per original, requires 14x 6x2mm magnets. Magnet cover available.