120mm fan mount for wall-mounted blast gate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For purpose of use fan with blast gate.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 223
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
I really liked this blast gate but rather than use it as a gate with a hose connection both in and out, I wanted to connect a 100mm hose on one side and a 120mm fan on the other for use within my printer's enclosure as the exhaust.
Uses 8x Voron-spec heat-set inserts (M3, 5mm wide, 4mm deep) and 8 M3 screws (length depends on how you're connecting things up).
Computer fans are sized for M4 screws rather than M3, so you'll probably need washers as well.
Sorry, no STEP file I just slapped this together really quickly! Also no pictures of the actual part as it's buried away in the assembly.