1 / 1
3 way corner bracket for 2020 aluminum extrusion with 5mm slot
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple design meant to be press fitted into 3 perpendicular 2020 aluminum extrusions.
- Ocena
- 5 / 5
- Polubienia
- 75
- Pobrania
- 370
- Wydruki
- 1
- Wyświetlenia
- 1562
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (105)Powiązane
I needed an end cap for 3 perpendicular 2020 aluminum extrusions but was not pleased with the models I found online so I modified an existing one for my needs.
My print parameters:
- Printed in PETG
- 0.2mm layer height
- 15% infill density
- 1mm wall thickness
Notes:
- No reason why PLA wouldn't work just as well
- 2 out of the 3 sides fit perfectly but I did experience some mushrooming on one side (used a rubber mallet to make it fit)
