1 / 2
Knob water vent / Drehknopf Wasserventil — zdjęcie 1
1 / 2

Knob water vent / Drehknopf Wasserventil

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Knob water vent / Drehknopf Wasserventil

Ocena
5 / 5
Polubienia
6
Pobrania
47
Wydruki
1
Wyświetlenia
236
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Rectangular interface from knob to vent is little bit conic shape in the knob. 3D model attached as well to fit your needs.

for my application the rectangular interface is a bit too loose and I used 1 layer of tape to fit my needs. As long as you have new vents or turning them on-off once in a while the knob is fine and works. After many years the vent needs much more torque for turning on-off…that is why knob normally collaps…and you need then a pliers to turn it. So knob is after longer time more a design cap than a tool.

Tagi