Espresso Coffee Grounds Funnel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep your coffee grounds off the ground with this funnel. Stays in place during tamping.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Introduction
This light duty funnel is for use on a 58mm portafilter.
The model comes in 2 versions: with and without magnets. The model with magnets takes Four 6x3mm cylindrical magnets.
Printing
Prints without supports.
The model easily comes unstuck from the build plate. I had good adhesion printing PETG on a smooth PEI plate. PLA will require a well cleaned build plate.
Use
Attach the funnel before grinding and leave it on during tamping.
Note: 3D printed objects may not be food safe. You can learn more here.