1 / 5
Espresso Coffee Grounds Funnel
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Keep your coffee grounds off the ground with this funnel. Stays in place during tamping.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 24
- Makes
- 0
- Views
- 202
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
Introduction
This light duty funnel is for use on a 58mm portafilter.
The model comes in 2 versions: with and without magnets. The model with magnets takes Four 6x3mm cylindrical magnets.
Printing
Prints without supports.
The model easily comes unstuck from the build plate. I had good adhesion printing PETG on a smooth PEI plate. PLA will require a well cleaned build plate.
Use
Attach the funnel before grinding and leave it on during tamping.
Note: 3D printed objects may not be food safe. You can learn more here.