1 / 2
GU10 spot modules
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Share Alike
GU10 spot, with cap, connectors and clamp
- clamp_counter: print on its side, with supports
- both connector bases: print vertically with screw on print plate. With tree support. For extra satisfaction: aim to get it off the build plate in one piece and screw it out of its support
- both rings require some tree support
- the cap needs heavy support. This isn't an easy one to clean.
- The crown shader, gu10 spot, clamp base don't need any supports
Infills and layers are not critical.
Female conector fits in the GU10 spot. Male connector in the clamp. (tolerance is applied on the female connector and on the clamp, M12x1.75 ISO Metric 6H profile and a -0.15mm on the faces)
GU10 fitting needed
M6x45 screw with nut, and a paperclip wire needed to complete the clamp.