LayersFactory
Report model
1 / 2
GU10 spot modules — image 1
1 / 2

GU10 spot modules

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Model information

Source
Printables
Category
Living Room
License
Creative Commons — Attribution — Share Alike
DetailsMakes & commentsRemixesCollectionsRelated

GU10 spot, with cap, connectors and clamp

  • clamp_counter: print on its side, with supports
  • both connector bases: print vertically with screw on print plate. With tree support. For extra satisfaction: aim to get it off the build plate in one piece and screw it out of its support
  • both rings require some tree support
  • the cap needs heavy support. This isn't an easy one to clean.
  • The crown shader, gu10 spot, clamp base don't need any supports

Infills and layers are not critical.

Female conector fits in the GU10 spot. Male connector in the clamp. (tolerance is applied on the female connector and on the clamp, M12x1.75 ISO Metric 6H profile and a -0.15mm on the faces)

GU10 fitting needed

M6x45 screw with nut, and a paperclip wire needed to complete the clamp.

 

Tags

lightspotgu10