Better Ikea Lack c270 camera mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made a mount that is vertical for the camera so it can see more of the build volume for ender 3 sized printers
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 1
- Wyświetlenia
- 86
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I printed in PLA with 3 walls and 20% infill
BOM:
1x M3X18 Screw
1x M3 Nut
1x Elastic Band or 2x Wood screws
…yes its that short this time
Simply take off the monitor stand on the C270 and use a M3x18 screw and M3 nut to attach it to the mount. Make sure to not tighten it too much as it will break the thin plastic on the camera itself. Use an elastic band on the tabs to hold it in place or use the screw in one to screw into the leg of the lack
Thanks to https://www.printables.com/@Klipperboi for the photos of the screw in photos :)