Leatherman Sidekick Thumb Buttons
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two snap-fit thumb buttons for both the knife as well as the saw on the Leatherman Sidekick.
- Ocena
- 4,5 / 5
- Polubienia
- 18
- Pobrania
- 122
- Wydruki
- 2
- Wyświetlenia
- 478
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
The knife is 2mm strong, the saw 0.8mm. I wanted the additional height of the thumb buttons to be subtle and not super thick. I opted for one millimeter. You can adjust the parametrized Fusion 360 file in case you would want more thickness.
You could glue the buttons into the openings as well, but I would rather go with a snap-fit because you might want to remove the buttons if you cut / saw through something thicker and don't want the button to catch on it.
Printed in PETG. Scale up by 2% if you would like to print it with TPU.
My designs are released under a public domain license: You can do whatever you want with them. I put as much care and attention to detail into them as if they were commercial products. If my design solved a problem for you, I'd like to invite you to donate me a quarter of a filament spool. These little gestures go a long way and are quite motivating. Thank you!
