1 / 9
Scalpel Knife Set Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SIMPLE SCALPEL KNIFE WITH HOLDER STORAGE
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 34
- Wydruki
- 1
- Wyświetlenia
- 191
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Standard Digital File License
Introducing the Simple Scalpel Knife set with storage holder
A simple design that will fit 11p & 10a scalpel blades (not restricted to those. They are the ones I have tested). Use for light cutting and trimming.
Also available with a 3 or 6 knife stand and blade storage
- I printed mine with 0.1 layer height and 25% infill.
- 3 wall thickness
- Cover printed at 0.1 layer height with no supports. Most newer printers should be able to bridge the overhang.
- The handle is printed with very little manual support under the blade end. See Image attached
- The cover is a snug fit
- The blade is a tight fit connection, so be careful attaching blade to handle. Maybe use some needle nose to hold the blade.
WARNING:
- PLEASE BE CAREFUL ASSEMBLING BLADE
- NOT FOR USE IN A STERILE ENVIRONMENT.