WD My Passport HDD Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU casing to protect the HDD from scratches, minimalistic
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 512
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Protective TPU casing for WD My Passport 1TB/2TB.
Since the HDD doesn't have rubber feet and will scratch over time, I made this thin and minimalistic TPU casing to protect it. The HDD can now be placed on the desk without having to worry about scratches.
It is designed to offer a tight and secure fit when using TPU (94A shore hardness), accounting for the flexing. The front part has a hole for the USB port.
I have designed it for the 2TB version (WDBYVG0020BBK-WESN) which seems to be the same size as the 1TB version. However, the versions with 4TB+ seem to be thicker.
Filament: TPU
I used “Das Filament TPU V2” with a shore hardness of 94A
Layer Height: 0.2mm
Bed adhesion:
I printed it on the Smooth PEI Sheet with little to no glue stick, as the part can warp easily. I ended up getting consistent prints without any warping by not putting any glue stick under the two ends of the part, only a tiny amount in the middle, so the ends won't come off the print bed.