WD My Passport HDD Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
TPU casing to protect the HDD from scratches, minimalistic
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 49
- Makes
- 0
- Views
- 512
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Protective TPU casing for WD My Passport 1TB/2TB.
Since the HDD doesn't have rubber feet and will scratch over time, I made this thin and minimalistic TPU casing to protect it. The HDD can now be placed on the desk without having to worry about scratches.
It is designed to offer a tight and secure fit when using TPU (94A shore hardness), accounting for the flexing. The front part has a hole for the USB port.
I have designed it for the 2TB version (WDBYVG0020BBK-WESN) which seems to be the same size as the 1TB version. However, the versions with 4TB+ seem to be thicker.
Filament: TPU
I used “Das Filament TPU V2” with a shore hardness of 94A
Layer Height: 0.2mm
Bed adhesion:
I printed it on the Smooth PEI Sheet with little to no glue stick, as the part can warp easily. I ended up getting consistent prints without any warping by not putting any glue stick under the two ends of the part, only a tiny amount in the middle, so the ends won't come off the print bed.