1 / 3
small tools holder x-acto blades scalpel dentis tools — zdjęcie 1
1 / 3

small tools holder x-acto blades scalpel dentis tools

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

4,80 € – 5,87 € netto (bez VAT)

Dla pliku: small.tools.holder.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 5,34 € netto (środek widełek).

Masa podana przez autora
67 g
Czas druku podany przez autora
5,33 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

A holder for small tools: tweezers, dentist tools and x-acto utility scalpel with replaceable blades.

Ocena
0 / 5
Polubienia
6
Pobrania
94
Wydruki
1
Wyświetlenia
418
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

Small tools holder

A holder for small tools: tweezers, dentist tools and x-acto utility scalpel with replaceable blades.

Print it “standing” with 10% gyroid/grid infill and grid support from build plate only.


The tool holder module couples to the attachment plate module, print one of each and you have what you need to hang small tools. Tools that I use it for are tweezers, dentist tools and x-acto utility scalpels and their replaceable blades.

 

 

MODULA - a module based tool holder system

This module attaches to the adapater biltema  or the vanilla adapter available here on Printables. The vanilla adapter can be modified so it fits wherever You need to hang these modules.

A universal adapter for (metric) PEG boards, this one fits Biltema, Jula, Clas Ohlson, CC 12mm (15/32 inch) spacing of the 4mm (5/32 inch) diameter screw holes.

The idea is a adapter plate (metric/imperial/plain) that attaches to a module, the module snaps on to this adapter with dovetails.

Why use an adapter? Everyone can share the modules worldwide, and just adjust the adapter plate for their needs.

 

Tagi