Creality Falcon2 Pro Material Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Material holder for the Falcon2 Pro aluminum bars.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 153
- Wydruki
- 1
- Wyświetlenia
- 820
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Since most wood is warping and sometimes gets moved by the Air Assist, I tried to find a solution that works with the aluminum bars from the Falcon2 Pro.
This material holder comes with a glider and a holder. The glider slides onto two bars and can be moved out of the way if needed.
You need a M5 screw and bolt to keep both together. When the material is in place, you can tighten the screw with a screwdriver, and after that, the material is not moving anywhere anymore.
[EDIT] This version gets stuck with the trash tray if you use M5x30 screws. To get the tray out, you need to lift the bar with the glider a little bit. I made a second version that works well with M5x16 screws.