Creality Falcon2 Pro Material Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Material holder for the Falcon2 Pro aluminum bars.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 153
- Makes
- 1
- Views
- 820
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Since most wood is warping and sometimes gets moved by the Air Assist, I tried to find a solution that works with the aluminum bars from the Falcon2 Pro.
This material holder comes with a glider and a holder. The glider slides onto two bars and can be moved out of the way if needed.
You need a M5 screw and bolt to keep both together. When the material is in place, you can tighten the screw with a screwdriver, and after that, the material is not moving anywhere anymore.
[EDIT] This version gets stuck with the trash tray if you use M5x30 screws. To get the tray out, you need to lift the bar with the glider a little bit. I made a second version that works well with M5x16 screws.