DIN Vertical dual UHP 200/350
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIN clip for two Meanwell UHP 200/350. Includes mirrored version and versions with Voron's and ZeroG's logos.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 152
- Wydruki
- 1
- Wyświetlenia
- 532
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Marked as remix because it was heavily inspired. Had to remake the model from scratch since design files weren't included but most dimensions were taken from the original design.
Removed the slide-in mount for a DIN clip. Will fit he Voron Trident/2.4 and the ZeroG Mercury One electronics enclosure.
Note : The dual UHP-350 might not fit the current Mercury One electronics enclosure. The dual UHP-200 does.
BOM (for each handle)
8* M3x4x5 heatset inserts
8* M3x8 SHCS or BHCS
Printing settings
Recommended Voron print settings but since it's not a part under load, lighter infill or walls might work.
I'm not a thermodynamics engineer but the PSU is specified to be installed on a metalic plate to dissipate heat, which means the mount can become warm. The PSU will shut down at 70°C so anything than can handle more than 70°C will work (ABS, ASA, PETG ?, …).
Maybe add a fan to make sure the PSU gets enough cooling.
Updates
08/04/2025 : added the UHP-350 version
Check out my other ZeroG Mercury1 mods