Telsa Turtle Mobile Charger Garage Door Passthrough
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
4,64 € – 5,67 € netto (bez VAT)
Dla pliku: Telsa Turtle_0.4n_0.2mm_PETG_MK4IS_3h39m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 5,16 € netto (środek widełek).
- Masa podana przez autora
- 103 g
- Czas druku podany przez autora
- 3,64 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
This is a small circular device to passthrough a tesla mobile charger cable (1/2" OD) under a garage door seal.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 417
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
I use an outlet in my garage to connect my Tesla Mobile Charger but my car is parked outside. I saw models on here as well as on amazon. I created my own version to minimize the material needed and it reminds me of a street turtle. The cord hole is tight at the bottom and is intended to hold the cord in the middle of the device to keep it off the ground.
I printed this in PETG with 5 perimeters and added additional top layers up to the top of the cord passageway.
EDIT: I ended up reprinting this with PCCF after the PETG version cracked along the top. No issues for over a year now.