FPV DISPLAY MOUNT/BRACKET FOR RADIOMASTER BOXER
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The FPV display mount for Radiomaster Boxer supports a 1080p HDMI display, fits original cases, and holds over 800 grams
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 215
- Wydruki
- 0
- Wyświetlenia
- 1042
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
FPV DISPLAY MOUNT/BRACKET FOR RADIOMASTER BOXER
BEST THING TO HAPPEN TO FPV SINCE THE INVENTION OF LIPO CELLS
- Allows to mount a HDMI 1080p display
- Fits in the original radiomaster boxer carrying case - no disassembly required
- Easy assembly
- Can hold over 800 grams of weight
Model consists of 2 files:
- Radiomaster boxer bracket
- Display bracket
RM BOXER BRACKET
Use two screws holding the strap to secure the mounting bracket
You will need a hex nut with rounded head and a GoPro fastener co connect two brackets
The Radio antenna goes through a hole in the back. Tighten by hand.
DISPLAY BRACKET
- designed to work with this display specifically.
- Has 4 holes for mounting rails ( not yet released) that will connect a VRX on the back
PRINTNG GUIDELINES
Tested with PLA.
If the display doesn't fit, that means the model shrunk after cooling down. If this occurs, scale by 0.3% in X and Y axis in your slicer.
Use Honecomb infill, 25% for extra strength.
Use supports for overhang next to 5V opening.
Cut the two little tabs by the button on the top of the display bracket with exacto knife.
If you want to collaborate on the design of the VRX please let me know.