CYC Photon Chainring Removal Tool - Billet/Socket Alternative
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Chainring Tool for CYC Photon motor
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A specialized 3D printable tool designed to safely remove and install the chainring on the CYC Photon mid-drive e-bike motor without damaging the components.
This functional print acts as a budget-friendly alternative to expensive metal sockets by utilizing standard nuts and bolts to reinforce the plastic teeth, preventing shearing under high torque.
Hardware Requirements:
5x M4 x 12mm bolts with 5x M4 nuts (for the outer interface teeth).
(Optional but Recommended) 3x M4 x 18mm bolts with 3x M4 nuts to reinforce the center section for added durability during stubborn removals.
Print Settings:
To ensure the tool handles the torque required for bike maintenance, use heavy settings:
Perimeters / Walls: 8 (Crucial for strength around the bolt holes)
Infill: 45% or higher
Material: PETG, ABS, or tough PLA recommended for maximum rigidity.