Liczymy pasujące modele…
UPDATE 2025-03-11: A little Disclamer In case that is not already obvious to you – do NOT try to use this tool with significant force or the layers will sheer off. It will not withstand significant force unless you print it our of metal…
For removing and installing Shimano Direct mount chainrings, new 12 speed style. Print with 4 perimeters and 25% infill in PETG. Print with the notches facing up and supports on. Clamp the tool in a vise and rotate the crank to remove the…
Here is a model for a tool to loose or tighten the nut on an Bosch E-Bike Gen4 chainring. I printed mine in PETG, this is quite sufficient. Due to the fine thread, too high torques should not be used here anyway. Use with an ½ inch…
A replacement chainring guard for a SRAM Truvativ crank. Hole spacing is 122.5 mm, outer diameter 210 mm. Print Settings I would recommend printing it with 100% infill and at least four perimeters.
There are gossips that at certain speed under specific conditions, you may potentially save some of these precious watts. Printed with PETG, works with PLA as well. You will need standard 3mm zip ties to affix it to crankset. Brackets…
Use case: I use a regular (not narrow-wide) chainring in the middle position of a triple crankset; a poor man's 1x drivetrain. I currently use a front derailleur as a measure of chain retention, but I still get rubbing when in either…
Spare Chainring Protector for Author Classic SX bike, model around 2002 year. Náhradný ochranný kryt reťaze pre Author Classic SX bicykel, model okolo roku 2002.
I have a Raymon Trailray e-Mtb, changing my chainring from 38T to 34T I needed a new chainguide because the original one leaves a big gap, so the chain could fall off while riding. Based on the old one I created a new one to be flush with…
This is a printable version of the discontinued Park Tool product CDG-2, seen here: https://www.parktool.com/en-us/product/chainring-diameter-gauge-cdg-2 Use it to identify the bolt pattern used on the chain rings on any kind of bike,…
What it says. I would use something that doesn't shatter but bends. Could be bugs so let me know. BCD and teeth are the main two variables. Currently set at 104 bcd and 32teeth You can also set the bolts holes larger and fit a section of…
I've printed it in PETG with 100% infill and 3 perimeters. No need for support. As you can see in the picture, it worked well for me. It doesn't need much torque.
EN: Chain guard for Orbea with chainring 48 teeth DE: Kettenschutz für Orbea Kettenblatt mit 48 Zähnen Use four M5x10 screws with lens head and M5 screw nut to fix the chain guard.
New cranks for my wife means yet another spiderless chainring standard, and in the case of SRAM 8 bolt chainrings, this means 8 tiny proprietary M4x8 screws to not lose. I thought about putting them in a little ziploc bag and zip tying…
Chainring bolt & nut models, for use with 1x drivetrains. More precisely, you should be able to use them with any single-specific crank (track, single-speed), or to mount a standard (narrow-wide or not) chainring to a double/triple…
I gout a touring bike that i use for daily commute. It is comfy and quick but few times I got stain on my jeans. I removed the original plastic piece and designed this. Warning: If you remove the original plastic peice from the crankset,…
I put this up to have an easy way of checking whats the max chainring size for my bike frame without having to buy several sprockets in advance. Note that the Chainring sizes are rough measurements and might vary to the real deal…
Broke mine, so I designed a new one. Print with whatever you like, any material will be fine, any 0.4-0.8 nozzle does the job. Designed in Fusion 360. Made 2 versions, both are fine, v2 stronger on the edge. Have fun!
I needed different size Chainrings to check clearences and because I wanted to learn more about the Parametric feature in Fusion360, I made a parametric Chainring. It's for a normal (12.7mm Pitch) Bicycle chain. I did print some Idlers…
In order to assembly and fit position of front derailleur you can use this tool.
adapts a 110bcd road chainring to the bafang bbs02. The bbshd uses a different bolt circle diameter and center bore(smaller). works with a 36t ring, any smaller and the chain doesn't clear the spider. print flat side down, I used petg and…
Standard chainring bolt & nut models, probably for use with double & triple cranksets. A Solidworks model based off of the Inventor model by KsCustoms over at GrabCAD ( https://grabcad.com/library/chainring-bolts-8mm ). The thread is M8 x…
This tool was inspired by this Park Tool video . I thought it was a great idea, & decided to create a handle to make it significantly easier to use. I don't believe this works for cassettes - the tooth profile is more "square" instead of…
The joint is based on a balance between friction and tolerances; although the design also takes this into account, it may be advisable to test the relationship between print speed and extrusion speed. Obviously all the other parameters…
42 Tooth Chainring. Scanned model referenced for creation.
The original chainring guard on my Riverside 500E (Decathlon) cracked after normal use — and I quickly discovered that no spare part was available , either through Decathlon or third-party suppliers. Rather than leaving the chainring…
I work at a bike shop, and they were aggressively cleaning up the service area, resulting in a bunch of stuff getting thrown out, including this awesome 55t Specialized S-Works aero time trial chainring. It looked so damn cool, I couldn't…
based on Litepro 53T chainring with integrated chainring guard integrated spacer of 1.5 mm, plus an ordinary chainring stacks to about 5 mm spacing between the closest wall of the guard & the outboard face of the chainring this, plus my…
I got a Shimano FC-5603 triple crankset on which I want to install a single chainring for a 1x drivetrain. The stock chainring nut + bolts fix the two larger chainrings (a double) to the crankset. The granny gear is fixed with just bolts…
This is a pretty specific print that very few people are likely to need. But just in case, I figured I'd upload it if anyone else needs it! This is a socket for the chainring locknut on some E*Thirteen cranks. Not 100% sure which exact…
I have a triple crankset on which I want to install a single chainring for use in my 1x drivetrain. I have the stock chainring nut + bolts, but these are meant to bolt together the bigger 2 of 3 chainrings to the crankset. As such, a…
A combined tool based on the VAR PE-35500 ( https://www.vartools.com/en/combined-tool-for-chainring-bolts-var-p828.php ). The tool does have some limitations. If the nut is clocked at a certain angle, the throat of the tool won't be big…
Anilha adatadora para pedaleira MT770 para converter 3 pratos em 2 Se imprimir este objeto, por favor partilhe a sua impressão 3D http://www.thingiverse.com/thing:1157690/add_instance Versão V3 para parafusos de já de 2 pratos mais fino…
For this chainring: https://www.corratec.com/de/unternehmen/zzyzx/ e.g. at this bikes: https://www.corratec.com/de/bikes/bike/pro-sport-bk29402/#&gid=1&pid=1 https://www.corratec.com/de/bikes/bike/pro-team-bk27401/
English Universal Bicycle Chainring Guard / Bash Guard Keep your pants clean from chain grease and protect your front chainring from hits! Designed for standard 4-bolt bicycle cranks. Features: * Protection: Prevents clothes from getting…
Frog 52 Inner Chainring Guard / Chain Protector Replacement Replacement inner chainring guard for Frog kids bicycles. The original plastic guard was broken, so this part was recreated from the physical original component using a 2D scan,…
This cap is designed to fit on the inside of the smaller chainring of a Shimano Ultegra R8000 crankset. The cap is to prevent the chain from wedging itself between the small chainring and the BB on frames that have a large BB outer shell…
A specialized 3D printable tool designed to safely remove and install the chainring on the CYC Photon mid-drive e-bike motor without damaging the components. This functional print acts as a budget-friendly alternative to expensive metal…
This is a replacement chainring guard for the Islabikes Beinn 24 I created for my child's bike. It will fit other sizes of the Beinn (except the Beinn 29). Screws thread directly in to the holes. Based on this product:…
A simple Chainring Protector for 104 mm BCD oval 38T Chainrings. To mount it simply use m3 countersunk screws from the outside and tread them into m3 Nuts put in the hex drive slots of the (hollow) Chainring fixing Screws.
I busted my chainguard going over a stump. I couldn't find a compatible model online, so I made this one.
Thanks to the original creator! Love you @aiber Slightly modified version of the original which allows larger Flat Top chain rollers to fit. They are only slightly larger, so this mod may not have been necessary at all. I didn't increase…
This design uses 5 M2 x 12 mm screws. The pilot holes are 2.1 x 13.5 mm and not threaded. It's advised tapping the holes with the screws before installing on the chainring. Be careful though and hold the tabs tight when doing so because…
For this chainring: https://www.corratec.com/de/unternehmen/zzyzx/ e.g. at this bikes: https://www.corratec.com/de/bikes/bike/pro-sport-bk29402/#&gid=1&pid=1 https://www.corratec.com/de/bikes/bike/pro-team-bk27401/
A parametric chainring stand to display your chainrings either at your shop or at home. Design is parametric, meaning you select your toothcount, and your chainring thickness, and the stand will auto-adjust to fit your chainrings.
washer requiered for diferent chainring offset. This washer is 1,0mm thick. You can change thicknes in the slicer. see washer instalation on E-13 www site
This is a work in progress project. Use and modify at your own risk ! If you neither know what Hyperglide is, nor what BCD104 means, you can now safely stop reading :-) First off, this is not my own "invention". A similar product is sold…
Dahon Eco 2 Chainring Guard This is my first 3D design. I created it as a replacement chainring guard for my Dahon Eco 2 folding bike. The guard helps keep trousers and other clothing away from the chain while giving the crankset a…
I recently broke my bikes chainring guard. It looks worse than it is, the chain and the chainring themselves are fine. But the thin plastic cover on top of the chainring was broken. The guard was attached with 5 countersunk thermoplast…
a single chainring with cranks and pedals
This modification allows Shimano GRX RX610 brifters(and possibly other Shimano 12 speed brifters) to shift MTB pull ratio triple front derailleurs, tested with Deore XT FD-M771. Requires a strong material to handle the forces applied…
In order to assembly and fit position of front derailleur you can use this tool.
I needed different size Chainrings to check clearences and because I wanted to learn more about the Parametric feature in Fusion360, I made a parametric Chainring. It's for a normal (12.7mm Pitch) Bicycle chain. I did print some Idlers…
A parametric chainring stand to display your chainrings either at your shop or at home. Design is parametric, meaning you select your toothcount, and your chainring thickness, and the stand will auto-adjust to fit your chainrings.
For this chainring: https://www.corratec.com/de/unternehmen/zzyzx/ e.g. at this bikes: https://www.corratec.com/de/bikes/bike/pro-sport-bk29402/#&gid=1&pid=1 https://www.corratec.com/de/bikes/bike/pro-team-bk27401/
