Luckfox Pico plus - Sharkjack inspired case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Luckfox Pico plus case. One version is the PCB unmodified the other is inspired by Hak5 SharkJack.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 443
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I was looking for a case that was inspired by hak5 sharkjack and could not find anything. After no responses from hak5 after a few attempts to request official permission, I figured I would post this here, though if they ask I will remove this. I see a post on Hak5 forum that said the PCB was close source but that everything else was open source with a thumbs up from Darrin at Hak5. So I take that to mean the case is open. This project in NO way competes with the sharkjack, that thing is killer!
I printed this on my Bambu X1C and my Qidi X-Max3 no supports and it prints in PLA or ASA really well. It captures an RJ45 in the same way I assume Hak5 does it. I own every one of there devices, just not the sharkjack so its a guess. The goal was to get it this far and then now I will take my design to a fab company and get them to pritificate it. I use these as a security token we put at our client sites to authorise the site to connect to our servers with their VoIP traffic. The device is running Alpine Linux.
URL for my drawing: https://cad.onshape.com/documents/a49dfef937a604bd516d5218/w/ac40cf72fcb2aa899d3c2e0c/e/3e712566ef5306f9efa289a0?renderMode=0&uiState=673ba98460d000766f8ea65b